PRODUCT DETAIL
| Size | 158x79x30mm |
| Starting current | 200A 300A |
| Peak current | 300A 600A |
| Input | 5V2A / 9V2A |
| Output | 5V2A / 9V2A |
| FuIly charge time | 5-7 hours |
| Capacity | 10000Mah |
| Power display | Power indicator digital display |
| Operating temperature | -30℃-70℃ |
Car stalling is common:
Idle time is too long
Forget to turn off electronics
Suddenly broke down on the way
insufficient electricity because of the cold
Car stalling is vexing:
It's a hassle to get help pushing a car
road rescue expensive
It's not convenient to get electricity from other people's cars
product function introduction:
① Digital display screen
② TYPE - C charging port
③ USB output
④ Emergency light (3 different modes)
⑤ Car starting port
⑥ Switch
⑦ hang rope hole
display:
Accurate digital power display, accurate control and clear at a glance
illumination，Emergency lighting:
Long press the ON key for three seconds to turn on the lighting and enter the strong light mode
In strong light mode, press again to enter strobe mode
In strobe light mode, press again to enter SOS mode
eight functions for safe travel:
Lighting/SOS/Strobe
Blow up for tire
Type-c fast charging
Charging for mobile phone digital product
Aviod reverse connection of positive and negative poles
Instantly start at minus 40 degress
High efficiency and safety cell
Stronge 800A start current
Easy 4 steps start, no need for external assistance :
1. First,insert the battery clip into the start port of the car emergency power supply.(D 0 shape)
2 .Clamp the red clip and black clip to the positive "+" and negative "-" of the battery respectively.
3. Get into the car and start the car.
4. Remove the clamps from the car battery.
Pay attention to the battery clip connection:
note:the battery clip must be inserted in place, otherwise it
suitable for car models:
3 color optional,many colors many choices:
RELATED PRODUCTS
